The installation of NFC Tags
The Physical
Design: Anti metal gas tank, weatherproof
Size: 30 mm x 3 mm
Material: ABS
Chip: NXP NTAG 213
IC protocol: ISO 14443A
Frequency: 13.56 MHz
Operating temperature: -25°C to 70°C
Storage temperature: -55°C to 125°C
Design: Anti metal gas tank, weatherproof
Size: 30 mm x 3 mm
Material: ABS
Chip: NXP NTAG 213
IC protocol: ISO 14443A
Frequency: 13.56 MHz
Operating temperature: -25°C to 70°C
Storage temperature: -55°C to 125°C
The Installation
The tags are designed to be install indoor and outdoor. Mount them on any surface using screws or double-sided tape. Do not break the housing during installation.
The tags are designed to be install indoor and outdoor. Mount them on any surface using screws or double-sided tape. Do not break the housing during installation.
Secure installation
Use 4.8mm or 3/16" flat head countersunk concrete/wood screws to secure NFC tags on wall or wood surface.
Installation height
Recommended 160cm or 5" from ground level
Use 4.8mm or 3/16" flat head countersunk concrete/wood screws to secure NFC tags on wall or wood surface.
Installation height
Recommended 160cm or 5" from ground level
Easy installation
Peel off the double side tape and stick the NFC on any smooth and clean surface.
› Download PDF
Peel off the double side tape and stick the NFC on any smooth and clean surface.
› Download PDF